1997-2013 Baer Tracker Adjustable Rear Tie Rod Ends
Lowered Corvettes look great, but changes in suspension geometry can create "bump steer." The 1997-2013 Baer "Tracker" Adjustable Tie Rods effectively eliminate bump steer and are a great solution to a common problem with altered suspensions.
Bump steer happens when the suspension is compressed, often while cornering, traversing rough sections, or when extreme road surface change is encountered. This irregularity demands further suspension movement that exceeds the range of movement (articulation) of a standard tie rod end. In these situations, the tie rod actually restricts the movement of the steering arm, which causes an immediate, nasty, and often scary change in toe (steering direction). At best, this is an unpleasant handling quirk, and at worst it can be dangerous. More than a few enthusiasts have found themselves "backing off" at speed as a direct result of bump steer.
Baer's pin height adjustable "Tracker" Tie Rod Ends allow you to compensate for ride height and suspension geometry changes. They allow a full range of articulation so the tie rod ends can be made to track in the same arc of range (movement) as the steering arms. Adjustments are made by simply moving the provided steel adjustment shims to either side of the spherical bearing (rod end).
- Fits 1997-2013 Corvettes
- Specifically Designed for Lowered Corvettes
- Available in Black Only
- 4140 Steel Pins
- Precision Machined 6061 T-6 Aluminum Sleeves
- Black Anodized Finish
- No Modification to OE Spindles Required
- Fully Adjustable - Approximately .875" of Adjustment at the Spindle
- Simple Installation - Direct Bolt On Upgrade
- Sleeve Length: 4"
- Inner Sleeve Thread Size: M14" x 1.5 RH Thread
- Outer Sleeve Thread Size: 5/8" x 18 RH Thread
- Heim: 5/8" x 5/8" Teflon Lined
Also known under these part numbers: (For reference only)