1980 C3 Dash Wiring Harness - Manual Transmission VMA8000MT
The Original Design Series™ wiring harnesses are manufactured exactly as the wiring was made when your vehicle left the factory in St. Louis. These harnesses are made to the exact O.E.M. (original equipment manufacturer) specifications, using the original factory blueprints, and are factory-correct in every way. These are full-assembled, ready to install, “plug & play” accurate reproduction wiring harnesses. You will NOT have to cut any wires, crimp any terminals, or make any modifications to these harnesses when installing them in your Corvette.
1980 C3 Corvette Dash Wiring Harness Connects to:
- Alarm On/Off Switch Connection (driver & passenger side)
- Alarm System Flasher
- Alarm System Relay
- Brake Light Switch
- Bulkhead Connector (passes through firewall)
- Carburetor Electric Choke Relay
- Center Gauge Cluster
- Cigarette Lighter
- Cigarette Lighter Ground
- Courtesy Light (driver & passenger side)
- Courtesy Light Switch (driver & passenger side)
- Courtesy Light Timer
- Fuse Block
- Gauge Cluster
- Glove Box Light
- Ground (to hinge pillar inner reinforcement)
- Headlight Dimmer Switch
- Headlight Switch
- Heater & A/C Control Light Harness Connection
- Heater & A/C Controls
- Horn Relay
- Ignition Switch
- Intermittent Windshield Wiper Module Connection
- Neutral Safety Switch Extension Harness Connection
- Optional Equipment ("IGN" & "BATT" feed)
- Parking Brake Warning Light Switch
- Power Door Lock Harness Connection (driver side)
- Power Window or Power Door Lock Harness Connection (driver & passenger side)
- Power Window Switch (driver & passenger side)
- Radio
- Rear Body Harness Connection
- Seat Belt & Ignition Key Warning Buzzer
- Seat Belt Buckle Switch Connection (driver side)
- Turn Signal Switch Connections
- Vanity Mirror Light Harness Connection
- Windshield Wiper & Washer Switch
Also known under these part numbers: (For reference only)