1966-1968 Aluminum Radiator Big Block and 1968 Small Block w/Auto Black Ice
This unit is correct for 1966-1968 427 with Automatic Transmission and 1968 327 w/Auto Transmission 22.5" Core Width.
Our high performance two row Black Ice Coated Aluminum Radiator is a Direct Fit for all 1966-1968 big block Corvettes. This model also fits 1968 small block engines that were equipped with automatic transmission. This radiator will provide 25% more cooling than the stock four row copper radiator. It features the same size and configuration inlet and outlet, factory type channels, and press formed end tanks.
The Black Ice Coating is a special two part epoxy paint. It is applied in a spray and adheres to the aluminum and will not ever flake or peel off. It is s semi-gloss finish that will give the radiator the look of an original copper/brass unit. The total thickness of the dried product is on .002" thick and it will not affect the cooling performance whatsoever.
Made in USA
- 22.5" Core Width
- Two Rows 1" Tubes
- Serpentine Fin arrangement with 15 Fins/inch
- 25% Increase In Cooling Capacity
- Direct Replacement For Original Brass Copper Unit
- No Modifications Required
NOTE: Our Direct Fit Aluminum Radiators are designed to improve cooling capacity over the original equipment aluminum or brass/copper units and fit properly within the various core supports without modification. Always confirm the size (core width) of your existing radiator as we see many Corvettes with non-original core support/radiator combinations or engine swaps that lead to incorrect replacement radiator selection. The radiator is but one of many components in the cooling system and its efficiency is often compromised by the lack of proper hood, core and radiator seals, incorrect fan or shroud combination, fan clutch/ thermostat and circulation issues, or even ignition timing. If you have questions, please feel free to contact us.
Also known under these part numbers: (For reference only)