1965 Brake Line Front Brass Block LH 3/16 Inch Lines & Z06
Give your 1965 Chassis that OE Original look with these 100% correct reproduction Front LH Brass Brake Line Blocks.
This application applies to 1965 using the 3/16" brake line fitting and also fits Z06.
New Brake Line Brass Blocks along with new brake lines and master cylinder will assure you that your braking system is working safely and properly.
This brass block mounts on LH frame rail below master cylinder, has mounting bracket attached to it as do most of the brass blocks, has four threaded holes for brake lines. One for line coming from master cylinder, one for LH front brake hose, one for crossover line that extends to RH side of frame And one for line that extends to rear brakes. Check the size of your lines as the 1965 has two different sizes. The 3/16" was used until about May, then it changed to 1/4" lines. Thread size was 3/8"x 24 for early cars, and 7/16" x 24 for the second series.
Also known under these part numbers: (For reference only)