1963-1967 327 Fuel Line Fuel Tank to Fuel Pump TBW
Your old stock 1963-1967 Small Block Corvette Fuel Lines can rust internally and, as a result, accumulate rust particles in your fuel filter. These correctly reproduced TBW Corvette Fuel Lines for your 1963-1967 solve this dilemma, and the problems associated with corroded, kinked and bent fuel lines. With these new Tin Bundy Welded Fuel Lines, you will deliver an adequate supply of clean gasoline from your tank to fuel pump and to your carbs or FI unit.
These TBW Fuel Lines run from the fuel tank to the fuel pump. This line starts at rear of car, is attached to rubber line, extends up the RH, side of frame rail to the fuel pump, where it hooks to pump with an S shaped molded hose.
TBW was original equipment on the Corvette. Tin Bundy Weld is the manufacturing technique used to make the brake line tubing. This brazing process yields reduced brittleness and improved resistance to corrosion.
Don't forget the correct Corvette Brake and Fuel Line Clips!.
Also known under these part numbers: (For reference only)