1955-1960 DeWitts Aluminum Radiator Manual Trans Black Ice Direct Fit
Improve the cooling capacity of your 1955-1960 Corvette in the original core support with no modifications! Our 1955-1960 Direct Fit Black Ice Aluminum Radiators for Manual Transmissions offer 35% increase in cooling capacity.
The Black Ice Coating is a special two part epoxy paint. It is applied in a spray and adheres to the aluminum and will not ever flake or peel off. It is s semi-gloss finish that will give the radiator the look of an original copper/brass unit. The total thickness of the dried product is on .002" thick and it will not affect the cooling performance whatsoever.
Made in USA
- 35% Greater Cooling Capacity
- Weighs Only 12 lbs.
- Rated 4637BTU vs/ 3128 BTU for Original Copper/Brass Unit
NOTE: Our Direct Fit Aluminum Radiators are designed to improve cooling capacity over the original equipment aluminum or brass/copper units and fit properly within the various core supports without modification. Always confirm the size (core width) of your existing radiator as we see many Corvettes with non-original core support/radiator combinations or engine swaps that lead to incorrect replacement radiator selection. The radiator is but one of many components in the cooling system and its efficiency is often compromised by the lack of proper hood, core and radiator seals, incorrect fan or shroud combination, fan clutch/ thermostat and circulation issues, or even ignition timing. If you have questions, please feel free to contact us.
Also known under these part numbers: (For reference only)
- 32-1239055M
- 1239055M
- 32-1239055M