2020-2025 C8 Molded Taillight Blackout Covers
Your Corvette already turns heads, but now you can take things to another level with a custom look thanks to these 2020-2025 C8 Molded Taillight Blackout Covers! Made from extremely durable, 1/8" thick Polycarbonate Lexan, these covers are built to last. These covers are virtually unbreakable with 250 times the impact strength of glass and 30 times that of acrylic. This means they won't break when installing, removing, or even if you drop them! The smoked finish is built into the Lexan, which means there is no worry of these covers fading, peeling, or chipping over the years!
Installation is made easy thanks to the automotive grade 3M adhesive backing! Proper surface preparation is vital to ensuring these covers stay put once installed. Be sure to thoroughly clean the area for installation with the supplied alcohol preparation pads. These covers, by design, do not create an air or water tight seal once installed. They are designed with water channels to allow water to flow through them. This provides hassle free maintenance - if you see any dirt building up between the factory lights and the covers, simply spray water along the top or side to flush it out.
Despite the sleek, smoked appearance, your Corvette will remain highly visible day or night! When lights shine at your taillights, all 3 reflectors per light will still reflect along with all parking, brake, reverse, and turn signal lights fully illuminating and shining through when in use. Set your C8 apart and create a sleek new look that fits your style!
- Fits 2020-2025 Corvettes
- Fits Coupes & Convertibles
- 4 Piece Kit
- 1/8" Thick Polycarbonate Lexan Construction
- Smoked Finish
- Will Not Fade, Peel, or Chip
- Extremely Durable
- Installs in Minutes
- Peel & Stick Installation
- Automotive Grade 3M Adhesive
- Alcohol Prep Pads Included
- Designed with Water Channels
- Hassle Free Maintenance
- Reflectors Still Shine Through
- Lights Still Highly Visible
- No Modifications Required
Taillight Blackout Kit Includes:
- Two (2) Smoked Polycarbonate Lexan Taillight Covers
- Two (2) 12 Mils Thick Side Taillight Reflector Overlays
- Alcohol Prep Pads
NOTE: Any wax or ceramic coating must be removed prior to installation to ensure proper adhesion. Failure to do so will result in poor adhesion and will impede product performance.
Also known under these part numbers: (For reference only)