1963-1979 C2-C3 Rear Differential 3:36 with 3.50 Yoke Refurbished
Our 1963-1967,1968-1979 Corvette Rear Differentials contain all new seals, Timken Bearings, and positraction clutch plates. Supplied with new Richmond Gear ring and pinion sets or carefully inspected, reconditioned and matched gear sets where noted. These units are rebuilt by certified GM re-builders that specialize in the Corvette differential. Rebuilt to meet or exceed original manufacturer's specifications and carry a one year warranty.
- 3:36 Gearing
- 3.50" Front Yoke Width
- All New Seals
- New Timken Bearings
- Brand New Positraction Clutch Plates
Important Tech Note: For 1963-1967,1968-1979 applications, please make sure that your front yoke width is 3 1/2". Yoke sizes will not interchange and differential cannot be installed if mismatched.
Parts Included in the Service:
- 1 Front Pinion Bearing
- 1 Front Pinion Rave
- 1 Rear Pinion Bearing
- 1 Rear Bearing Space
- 1 Pinion Bearing Spacer
- 1 Pinion Shaft Seal
- 1 Pinion Lock Nut
- 2 Side Carrier Bearings
- 2 Side Carrier Races
- 2 Side Axle Seals
- 2 Side Axle Clips
- 1 Positraction Clutch Kit
- 1 Cover Gasket
- 1 Cover Vent
- 8 Rearend Cover Bolts
- 10 Ring Gear Bolts
- 2 Bottles of Positrac Oil [46oz.]
- 2 Bottles of Positrac Additive [8oz)
Labor Included in this Rebuild:
Rebuild Rearend
Clean & Inspect All Gears & Parts
Set Up Bearings & Torque Pinion
Preload to GM Specs
Clean and Detail Case
Set Up Positraction Clutch Kit
Set Up Ring & Pinion Pattern to Remove Rearend Noise
Torque Side Carrier Bearing Caps To GM Specs