1962 C1 Restoration Decal Set - 340 Horsepower - OEM Number(s) (3718263,3764584,378044,3816290)
Your Corvette deserves only the finest treatment, and this premium restoration decal set is here to help you bring back that authentic, showroom-quality look. Within this meticulously curated kit, you'll discover a variety of period-correct decals to transform your Corvette into an absolute show-stopper. Please note that this set excludes decals related to engine codes, air conditioning, expansion tanks, or suspension components. Some decals require a water based application. Instructions for this can be found above under the "Technical Tip" tab.
Immerse yourself in the authentic charm of your Corvette, down to the tiniest detail. These decals have been expertly designed to faithfully replicate the original look and feel, injecting a sense of nostalgia and originality into your C1. When it comes to restoring your beloved classic, don't compromise on quality. Place your trust in our Corvette restoration decal kit and let your vintage beauty shine once again.
- Correct for 1962 Corvettes
- For 340 Horsepower Cars
- 9 Piece Set
- Correct OE Appearance
- Peel & Stick Installation
- Some Decals Require Water Based Application
- Accurate Reproductions
- Officially Licensed by GM
Set Includes:
- Jacking Instructions Decal (1)
- Unleaded Fuel Only Decal (1)
- Cooling System Caution Decal (1)
- 340 Horsepower Valve Cover Decals (2)
- Oil Filter Canister Instructions Decal for PF-141 Filters (1)
- Generator Warning Tag (1)
- Harrison Radiator Foil Tag (1)
- Cooling System Antifreeze Caution Decal (1)
Also known under these part numbers: (For reference only)
- 3718263
- 3764584
- 378044
- 3816290
- 61JKCV-2
- 629273
- 686420056348
- DC0224
- DC0299
- DC0467
- DC0468
- DECAL 25
- DECAL 30
- DZ0010
INSTRUCTION FOR APPLYING WATER SOLUBLE DECALS
1. Immerse decal in a tray of lukewarm water. Leave it submerged in water for about 1 to 2 minutes.
2. Allow sufficient time in the water and gently slide the decal a little to make sure it is loose.
3. Slide the decal over the paper edge about 1/4 inch. Gently slide it onto the surface on which you wish to place it.
4. If you are applying decals to an engine, it is best to let dry overnight and also avoid freezing temperatures.
5. Make sure the area the decal is to be applied to is free of grease, oil, dirt, etc. If it is new paint it is best to scuff up the surface a little to take the extreme gloss off so it will stick well.
6. After the decal is dry (at least 24 hours) a thin coat of clear shellac will help preserve the decal and keep it from flaking off. This is not necessary but merely helps preserve it and seal the edges.
7. If the decal flakes off in a short time, chances are the surface to which it was applied was not prepared correctly (as described above) or engine was operated too soon after applying.
8. Due to engine heat, oil and dirt - the life of the engine decals is somewhat short depending on how much you drive, etc.