Bug Me Video Pulling Engine and Clutch Service DVD Volume 2
In Volume 2 we demonstrate how to pull the motor. We start with showing where and how to lift the car and secure it on stands. Then we show in detail how to remove each necessary screw and nut to separate the motor from the car.
With the motor out and on the floor, we show ways to remove the flywheel and main seal. Next we show how to examine and replace the clutch disc, pressure plate, and flywheel and how to identify all the possible types to be sure you do the job right. We also show you what necessary changes need to me made in regards to the starter and flywheel when converting your car from 6 volt to 12 volt. Then we show you how to identify and replace the clutch release bearing and the arm that controls it. We now replace the rear transmission mounts that can cause clutch and shifting problems. Then you will learn how to replace the clutch cable from start to finish. The video winds up with putting the motor back in the car while showing you each step clearly and in order.
One hour of easy to follow step by step instruction, Including How To:
- Pull Motor
- Replace Clutch
- Replace Clutch Release Bearing
- Replace Crankshaft Seal
- Replace Rear Transaxle Mounts
- Replace and Adjust Clutch Cable
Also known under these part numbers: (For reference only)