Air Cooled VW 1949-1965 Front Torsion Spring King Pin Axle Beam Standard Width 111411027

Photos

Pacific Parts International PPI

Item ID: 306-244

VW Part #: 111-411-027

Availability: In Stock - Ships today if ordered by 3 PM CT
Only 1 Left, Order Soon!

Fits Years:

Karmann Ghia 1956-1965
Standard Beetle 1949-1965

$134.99

Buy 2 Or more And save up to $10.00 each

Add To:

Create List and Add Item:

This item will qualify your cart for Free Basic Domestic Shipping. Additional shipping charges may apply for oversize items.

Description

1949-1965 Front Torsion Spring King Pin Axle Beam Standard Width 111411027 - OEM Number(s) (111-411-027)

Get your Beetle or Karmann Ghia back on the road with our 1949-1965 Standard Width Front King Pin Torsion Spring. This torsion spring consists of 6 leaves that fits the upper or lower position and is a direct replacement for the factory springs. It is recommended to replace both upper and lower when replacing your springs. If one spring is weak, it will quickly wear out the stronger one.

This spring has 6 layers of leaves with 8 leaves in total. The top leaf and bottom leaf are actually two narrower pieces, with the center 4 leaves being full width. Each individual spring set has three correct drilled detents 18 inches apart (center to center) to accept securing grub screw lock.

The torsion springs are designed to hold the front end of your VW up off of the ground. Each spring is held in the front axle beam and the trailing arms attach to them. As the trailing arms travel up and down, the springs inside the axle beam twist to allow the suspension to move and twist or "spring" back into place.

Installation Note: Make sure to adequate grease spring before inserting in axle tube.

Fits 1949-1965 Standard Beetles
Fits 1956-1965 Karmann Ghias
Fits Upper or Lower Position
Sold Individually (2 Required for Car Set)
Steel Construction
Compatible with Standard Width King and Link Pin Axle Beam
Weight: Approximately 5lbs
Approximate Overall Dimensions
- 37 Inches Overall length (939.8mm)
- .72 Inch Overall Width
- .72 Inch Overall Height
Individual Spring Steel Leaf Dimensions
- 4 Leaves 37 Inch x .72 Inches (18.3mm) Width x .11 Thick
- 4 Leaves 37 Inch x .36 Inches (9.2mm) Width x .11 Thick