1963-1979 Mag Alloy Engine Case with 90.5-92mm Case Bore
When building an Engine from the ground up, case integrity is most important. Original used Engine Cases are often cracked, align bored improperly or too many times, and are weak in some manner that will compromise the longevity or end results of your investment and hard work. Often, the investment in a new Engine Case is little more than the cost of the necessary machine shop work required for a quality and durable rebuild.
This Universal Stock Type Magnesium Alloy Engine Case is fully inspected and Features:
- Prepped And Bored for 90.5-92mm.Oversize Cylinders
- 8mm. Steel Case Savers
Learn More from Our Knowledge Library
New to air cooled engines? Our guide explains how they cool without a radiator, the pros and cons versus water cooled designs, and the mechanical layout that defines every classic VW on the road.
Air Cooled VW Engine Explained - How It Works, Pros & Cons
Pulling your engine? Our step-by-step guide walks you through the under-car removal method — jacking and supporting the chassis, disconnecting fuel and wiring, the four transaxle bolts, and lowering the engine onto a creeper.
VW Air Cooled Beetle Engine Removal Guide Part 1 of 2
Reinstalling your engine? Our step-by-step guide walks you through transmission shaft alignment, the four 22 ft-lb mounting bolts, fuel and wiring reconnection, engine seal positioning, and clutch adjustment — so your VW fires up right the first time.
VW Air Cooled Beetle Engine Installation Guide Part 2 of 2
Also known under these part numbers: (For reference only)