Air Cooled VW 1963-1979 Mag Alloy Engine Case with 90.5-92mm Bore 84mm Stroker/Full Flow

1963-1979 Mag Alloy Engine Case with 90.5-92mm Bore 84mm Stroker/Full Flow

When building an Engine from the ground up, case integrity is most important. Original used Engine Cases are often cracked, align bored improperly or too many times, and are weak in some manner that will compromise the longevity or end results of your investment and hard work. Often, the investment in a new Engine Case is little more than the cost of the necessary machine shop work required for a quality and durable rebuild.

This Stroke Relieved Stock Type Magnesium Alloy Engine Case is fully inspected and Features:

• Prepped & Bored for 90.5-92mm Oversize Cylinders
• Stroke Relieved For 84mm Stroke Crankshaft
• Drilled & Tapped For Full Flow Oil Filter
• 8mm. Steel Case Savers 

Parts You Will Need

• 

  1950-1979 Beetle Lower Engine Mount Studs N145251

• 

  1950-1979 Engine to Transaxle Mounting Bolts10 X 70 X 1.5 2 Pieces N0104707

• 

  1950-1979 Starter Motor Bolt with Half Moon Shaped Head 110mm 111199101

• 

  1950-1979 Spring Washers Multiple Use 10mm Set of 4

• 

  1971-1979 8mm Case Stud Kit for Stock Dual Port Engine 043198035D

Parts We Recommend

• 

  1967-1979 200mm Sachs 12 Volt Flywheel 311105273A

• 

  1971-1979 Cylinder Head 90.5 and 92mm Complete Big Bore

Also known under these part numbers: (For reference only)

• 10186
• 686420259534