Door Skin Removal Drill Attachment
Use the power assistance of your drill to remove damaged door skins of passenger vehicles and light trucks. No more dust, dirt or sparks from time consuming grinding. And no risk of burn marks on the door frame! This Malco TurboXTools solution cuts the damaged door skin off the door frame! The model DSR1 Door Skin Remover inserts into the chuck of a minimum 14.4 Volt cordless or maximum 7 Amp corded drill. A telescoping clamp adjusts to fit length and width of any drill housing for easy one hand operation. A narrow working head, with spacer guide, cuts through the rounded edge of the door hem. Lateral adjustability of the cutting blades ensures optimal performance in 20 to 22 gauge (0.91 to 0.76 mm) automotive steel. Simply point the blades into the hem to start the cut. The serrated upper blade bites onto the two layers of metal without slipping. Turning the tool, with the spacer guide flush against the hem, allows the tool to cut off a narrow strip along the hem edge. The Malco Door Skin Remover also navigates over mild body lines and around corners to finish the job. Long lasting, hardened shearing blades ensure long service life. Blades are also easily replaceable and are available as a set with a factory installed spacer guide.
Also known under these part numbers: (For reference only)