1971-1979 Super Beetle Front Wheel Bearing Hardware Kit for Disc Brakes
1971-1979 Super Beetle Front Wheel Bearing Hardware Kit for car with Disc Brake upgrades.
Hardware Kit Contains:
- 2 Front Outer Wheel Bearings
- 6 16mm Din 933 Bolts
- 1 LH Wheel Bearing Dust Cap with Square Hole
- 1 Wheel Bearing Dust Cap
- 2 Front Inner Wheel Bearings
- 4 25mm Hex Screws
- 6 7 DIN Spring Washers
Tech Notes:
The square hole for the speedometer cable is cut into this dust cap. If you are replacing the cap, chances are that the square speedometer cable end could be worn enough that it is not keeping up with the grease cap revolutions causing a false speedometer reading.
You will also want to make sure that you have the "C" clip to install the speedometer cable properly when you install the grease cap.
Make sure you have extra wheel bearing grease on hand because you will almost always need to add some to your current wheel bearing or re-pack your bearings.
Also known under these part numbers: (For reference only)