1967 Bus Front Disc Brake Conversion Kit
Stopping is important; there's no arguing that! Upgrade your 1967 Split Window Bus by increasing your stopping power and performance with our Front Disc Brake Conversion Kit. This kit includes everything needed to switch to a front disc/rear drum combination on your Bus.
- Fits 1967 Split Window Buses
- Front Disc Brake Conversion Kit
- Necessary Master Cylinder/Reservoir Included
- Spindles NOT Included
TECH NOTE: If your spindles are damaged or show signs of excessive wear, you should consider replacing these before the installation of this kit.
TECH NOTE: When converting from 4 wheel drum brakes to a front disc/rear drum combination the master cylinder (included) must be replaced. Failure to replace the master cylinder may lead to premature wear of the front disc pads and disc rotors due to excessive residual pressure from the check valve found in drum brake master cylinders (front disc pads will continually make contact with the disc brake rotor).
Also known under these part numbers: (For reference only)