Air Cooled VW 1946-1979 Rear Axle Nuts 36mm without Flange Pair 311501221

1946-1979 Rear Axle Nuts 36mm without Flange Pair 311501221 - OEM Number(s) (311-501-221)

When replacing your Rear Axle Hub Nut on your Air Cooled VW, it will require either a breaker bar, torque multiplier, axle nut beater tool, or impact to get off and on. Torque specs are between 260-300 ft lbs. Always replace the cotter pin with a new one.

Our Rear Axle Hub Nut without Flange is Standard Thread and will fit either Left or Right Side. 2 are required per car.

We offer 2 different Rear Hub Nuts. Either will fit the designated applications.

• The Rear Hub Nut with Flange was used on 1967 Up applications.
• The Rear Hub Nut without Flange was used on Pre-1967 applications.

Application For Bus: 1955-1963 Bus with 1500cc Original Engine Models Only

• 36mm
• M24 x 1.5
• 18.06 mm Tall
• Without Flange
• Sold as Each (2 Required)
  
• Fits Left or Right Side
  
• Zinc
  

Parts You Will Need

• 

  1950-1979 Rear Axle Nut Removal Tool 36mm

• 

  1950-1979 Socket for Gland Nut or Axle Nut 36mm 1/2" Drive

• 

  1946-1979 Rear Axle Nut Split Pin Set of 5 N0125481

Parts We Recommend

• 

  1946-1968 Wheel Ball Bearing Rear Swing Axle with Manual Trans 311501283

Also known under these part numbers: (For reference only)

• 311-501-221
• 311501221
• 384672
• 686420313755
• 87-1643